E400 is a programmable thermostat for electric underfloor heating, controlled directly from the device. The entire schedule is stored in the thermostat itself, so the system does not require a WiFi network, an app, or an account - which is convenient in rented apartments, country houses, or simply when you don't want another app on your phone.<\/p>\n
The total power of the connected system must not exceed 3000 W (16 A). A 16 A circuit breaker is required in the circuit, and a 3 \u00d7 2.5 mm\u00b2 cable is recommended for power supply.<\/p>\n
Unlike thermostats with a fixed weekly cycle, the E400 allows you to choose how the week is divided:<\/p>\n
With electric underfloor heating, a floor temperature sensor is essential - without it, the covering is not protected from overheating. The E400 supports three sensor modes:<\/p>\n
The factory floor temperature limit is 45 \u00b0C. If it is exceeded, the relay switches off and the overheating alarm is activated; if it falls below 43 \u00b0C, the heating is resumed. The limit is changed from 20 to 70 \u00b0C according to the requirements of the floor covering manufacturer.<\/p>\n
<\/p>\n
The front part is 86 \u00d7 86 mm, protruding only 8 mm above the wall surface \u2013 one of the thinnest in our range. Mounted in a standard European 68 \u00d7 60 mm mounting box<\/a> with the mounting plate included in the kit.<\/p>\n The recommended height from the floor is about 1.5 m, in a dry room, without direct sunlight. It is not recommended to install the thermostat in a bathroom or other wet room - it is placed outside the room, and only the sensor is led into the floor.<\/p>\n