Price range: 133.10 € through 405.35 €
Aluminum foil heating mat, laid dry method – without tile adhesive and without a leveling layer. Installed directly on the subfloor, under laminate, parquet or parquet boards.
Only 3 mm thick, so the floor level is almost unchanged. Two-wire cable, FEP insulation, IP67, 10-year warranty.
Price is per set. Choose an area from 2 to 10 m².
The CATE-80 aluminum foil heating mat is designed for those cases when you want to install floor heating under laminate or parquet, and there is no adhesive layer and will not be. The mat is laid dry: on the subfloor, directly under the floor covering - no mortar, no drying time. Therefore, it is suitable not only for new construction, but also for renovations, when the floor height is limited.
Aluminum foil distributes heat evenly across the entire area of the mat, so the surface heats up evenly, without noticeable warm and cold bands.
Suitable for:
Not suitable:
80 W/m² is the comfort heating power. In a well-insulated house (energy efficiency class A or higher), it is sufficient as the main heating system. In older or poorly insulated homes, CATE-80 is worth using as additional heating to the existing system - to keep the floors warm, and not to heat the entire house with it alone.
The mat can withstand up to +70 °C, but laminate and parquet manufacturers usually indicate that the floor surface temperature should not exceed 27 °C. Set this limit on the thermostat via the floor sensor – the exact value can be found in your flooring documentation. This is the most important installation point: an overheated flooring may peel off, and the warranty does not apply in such cases.
The mat is laid on the subfloor without cutting the heating cable. The mat is 50 cm wide, the mesh can be cut between the cable loops and the mat can be rotated to fit the shape of the room – Cutting the cable itself is prohibited..
Minimum laying temperature +5 °C. Connection cable 3 m. Installation work must be carried out by a qualified electrician.
No. This mat is intended for dry installation under laminate or parquet. For tiles, choose CTAE-100 or CTAE-160, which are laid in an adhesive layer.
No. CATE-80 is intended for dry rooms. For the bathroom, choose a mat that is laid in tile adhesive.
Only the mesh between the cable loops can be cut to allow the mat to be rotated and adapted to the shape of the room. The heating cable itself cannot be cut.
Yes. Without a subfloor, a large portion of the heat will go into the concrete base, and costs will increase.
Price range: 124.00 € through 272.00 €
This electric curtain track can be controlled via a mobile app, remote control, or operated manually. The compact motor is hidden behind the curtains, keeping it discreet. The track can be mounted on the ceiling or wall, and no electrical wiring is required.
Atsiliepimai
There are no reviews yet.