Heating cable for plumbing
In winter, when the weather gets colder outside and the cold hits, there are many problems with the pipes of private houses or country houses - they become clogged due to frozen water inside. These problems cause great inconvenience, and fixing the malfunctions can require very large financial costs. It is not worth taking the risk of hoping that there will be no severe frosts during the winter, avoid all the aforementioned inconveniences. Our high-quality self-regulating heating cable for water supply can fully protect plumbing lines.
Self-regulating pipe heating cable DVS installation
DVS heating cable is covered with a protective layer of inert polyolefin, which protects the cable from mechanical damage and long-term environmental exposure, which is why DVS cable is characterized by durability. This cable is installed on the outside of the pipe, in the lower part along the entire length of the pipe. It is attached with aluminum insulating tape, and the pipe itself must be additionally wrapped with 5 cm thick rock wool to ensure effective operation of the cable.
Power of the cut heating cable
The power of the DVS heating cable varies depending on the ambient temperature, so a thermostat is not required to control such a cable. The cable is installed with a three-core connection cable and plug and is plugged directly into an electrical outlet. The open end of the cable must be insulated with special thermal insulation, which you can purchase in our online store.
For pipes with an outer diameter of up to 32 mm, it is recommended to use a cable with a power of 11 W/m, and for pipes with a diameter of 32 mm and above, a cable with a power of 17 W/m is recommended.
DVS heating cable cross-section 10.5 x 6 mm.
The self-regulating pipe heating cable is cuttable, so you can purchase the required length of heating element.
How to choose the right cable?
Everything is determined by the diameter of the pipe and whether the cable will run outside or inside the pipe. Up to 32 mm, 11 W/m of power is sufficient, from 32 mm you need 17 W/m, and from 50 mm the cable is laid in two strips, so the footage will be doubled. To avoid having to calculate it yourself, answer four questions and our calculator will select self-regulating heating cable for pipes along with the exact footage and all accessories.
Thermostats
For more convenient control of self-regulating pipe heating / snow melting / gutter heating cable, a thermostat can also be used, which is installed on DIN rails. You can choose the right model in this category: Thermostats for pipe/snow melting/gutter heating systems.
The colours, shades or textures of the actual item may vary slightly from those shown in the photographs due to different screen settings, lighting or other technical nuances. There may also be minimal changes in dimensions or design due to the manufacturing process. By purchasing the product, the buyer accepts these possible differences. Thank you for your understanding.
Atsiliepimai
There are no reviews yet.